LS-006-A Stone Bead Mass Production Cut Slab Into Strips Machine
Put the slabs in the convet belt, driven by the belt, cut slabs into multi strips automatically, the diamond blade would cut through the slabs, also needed cut into the belt to make sure all slabs cut through.
We use aluminum blade spacer to control the strips size, we suggest use 5.5mm spacer to make final 4mm bead
LS-006-A Stone Bead Mass Production Cut Slab Into Strips Machine
The machine used to cut gemstone slabs into strips automatically, it can load 4-15 pcs of 8'' diamond blade at a time, come out multi strips, high efficient and easy operation.
Put the slabs in the convet belt, driven by the belt, cut slabs into multi strips automatically, the diamond blade would cut through the slabs, also needed cut into the belt to make sure all slabs cut through.
We use aluminum blade spacer to control the strips size, we suggest use 5.5mm spacer to make final 4mm bead, 7.5mm blade spacer to make final 6mm bead.
One of the cutting machine need for gemstone bead mass production.
Standard diamond blade to use 8''(200 mm).
Specification of LS-006-A
Voltage:220/380 V
Power:4 KW
Speed of blade:1800 RPM
Diamond blade size:8''(200 mm)
Overall Size:L142*W75*H105 cm
Diamond Blade to use
8''x1.0x25 mm Diameter x Thickness x Arbor
Put gemstone slabs in the convey belt, the diamond blade will cut through all slabs and a little cut into belt make sure all cut through
Control Box
Machine ON/OFF
Feeding speed adjustable
Convey belt forward and backword
Pump ON/OFF
After cutting
Photos take before shipping, testing for customers
