LS-100 2500W Ultrasonic Drilling & Carving Machine
For drilling, it can drill many round stone bead size 1.8-22 mm at a time, it can drill the beads easily normally within 15-20 minutes, used for stone bead and glass bead.
For carving, it works with a steel mold, which with different designs and shapes. It can carve gemstone into different shapes with the steel mold, normally carve one stone need 20-30 minutes, size within 80mm.
How to install the ultrasonic machine when first time get
LS-100 2500W Ultrasonic Drilling & Carving Machine
2500w ultrasonic drilling & carving machine, with both function drill and carve.
For drilling, it can drill many round stone bead size 1.8-22 mm at a time, work with 15 KHz 2500w ultrasonic generator, based on high frequency vibration, it can drill the beads easily normally within 15-20 minutes, widely used for stone bead like jade bead, crystal bead, quartz bead and glass bead.
Bead size can be 1.8-22 mm, drilling hole size can be 0.6/0.7/0.8/0.9/1.0/1.2/1.5/1.8/2.0/2.5 mm, it can drill 210 pcs 4mm bead, 121 pcs 6mm bead, 85 pcs of 8mm bead, 55 pcs of 10mm bead at a time.
Put the round bead in the middle of up mold(needle mold) and lower mold(Bead holder), the drilling needle would drill through, lower mold size should be same as bead size, like 8mm bead use 8mm lower mold, the up mold should same size as drilling hole size, like drilling hole should be 0.8mm, then use the 0.8mm up mold.
For bead shape, it can be round(mostly use), also chip beads, flat beads.
Donot forget to use silicon carbide as a drilling media in water.
For carving, it works with a steel mold, which with different designs and shapes. It can carve gemstone into different shapes with the steel mold, normally carve one stone need 20-30 minutes, size within 80mm.
Specification of LS-100-2500w
Voltage:220V
Power:2500W
Frequency:15KHz
Overall Size:L62*W55*H165 cm
