Lapidary Supply Diamond Tool Manufacture
ꄲ
Diamond Tool
ꄲ
Carving Points
ꄲ
A Shape Cylinder Diamonc Carving Points
A Shape Cylinder Diamonc Carving Points
Cylinder Electroplated Diamond Carving Points are excellent tool for stone carving, with diamond coated on tip, tip size 1-10mm, shank size 2.35mm(or 3 mm)
Diamond grit to choose from, #80(coarse), #120(medium fine grit), must use with water.
Although a shorter life span compared with sintered diamond carving burr, but a great choice for beginners.
Diamond grit to choose from, #80(coarse), #120(medium fine grit), must use with water.
Although a shorter life span compared with sintered diamond carving burr, but a great choice for beginners.
A Shape Cylinder Diamonc Carving Points
Electroplated Diamond Carving Points are excellent tool for stone carving, with diamond coated on tip, tip size 1-10mm, shank size 2.35mm(or 3 mm)
Diamond grit to choose from, #80(coarse), #120(medium fine grit), must use with water.
Although a shorter life span compared with sintered diamond carving burr, but a great choice for beginners.
| Shape | Shaft Diameter | Size |
| A-Cylinder | 2.35 mm |
4A 5A 6A 7A 8A 9A 10A 12A 13A 15A 18A 20A 25A 30A 40A 50A 60A 80A |
| A-Cylinder | 3 mm | 50A 60A 80A 100A |
4A means tip diameter 0.4mm, shape A-Cylinder
40A means tip meter 4mm, shape A-Cylinder
100A means tip meter 10mm, shape A-Cylinder
