Lapidary Supply Diamond Tool Manufacture
ꄲ
Diamond Tool
ꄲ
Carving Points
ꄲ
C7 Inverted Truncated Cone Diamond Carving Points
C7 Inverted Truncated Cone Diamond Carving Points
Inverted Truncated Cone Electroplated Diamond Carving Points are excellent tool for stone carving, with diamond coated on tip, tip size 1-10mm, shank size 2.35mm(or 3 mm)
Diamond grit to choose from, #80(coarse), #120(medium fine grit), must use with water.
Although a shorter life span compared with sintered diamond carving burr, but a great choice for beginners.
Diamond grit to choose from, #80(coarse), #120(medium fine grit), must use with water.
Although a shorter life span compared with sintered diamond carving burr, but a great choice for beginners.
C7 Inverted Truncated Cone Diamond Carving Points
Inverted Truncated Cone Electroplated Diamond Carving Points are excellent tool for stone carving, with diamond coated on tip, tip size 1-10mm, shank size 2.35mm(or 3 mm)
Diamond grit to choose from, #80(coarse), #120(medium fine grit), must use with water.
Although a shorter life span compared with sintered diamond carving burr, but a great choice for beginners.
| Shape | Shaft Size | Size |
| C7-Inverted Truncated Cone | 2.35 mm |
5C7 8C7 10C7 15C7 18C7 20C7 25C7 30C7 40C7 50C7 60C7 80C7 |
| C7-Inverted Truncated Cone | 3 mm | 40C7 50C7 80C7 100C7 |
5C means tip diameter 0.5mm, Shape C7-Inverted Truncated Cone
25C means tip diameter 2.5mm, Shape C7-Inverted Truncated Cone
40C means tip diameter 4mm, Shape C7-Inverted Truncated Cone
