LS-306-C 120W Adjustable Speed Jade Bead Gemstone Bead Drilling Hole Machine

LS-306-C Adjustable Speed Jade Bead Gemstone Bead Drilling Machine

The high speed stone bead drilling machine, work with a high power variable speed motor, rpm 0-18000 to suit different stone hardness.
Work with diamond drill bit sized from 1.0-2.5mm, it can drill very hard stone like jade bead, agate bead, crystal bead and soft like shell and amber.
Fix the stone bead with the clamp, works for bead size 4-20mm, all come with plastic clamp and copper clamp to choose from.
When drilling the bead, you can turn over the bead after half drilled, and start drilling from the other side, it makes drilling faster.
The machine can ship with the steel base or without steel base(save shipping charge).

Specification of LS-306-C
Voltage:110/220 V
Power:120w
Speed of Drill Bits:0-18000 RPM
Overall Size:L45*W35*H55 cm

Diamond Drilling Bits

Size to choose from

0#(2.5 mm) 1#(2.0 mm) 2#(1.8 mm)

3#(1.5 mm)4#(1.2 mm) 5#(1.0 mm)

one bag=100 pcs

The photo below shows how to automatically make round stone bead from rough stone, this machine set can make hard stone bead like jade, agate, quartz bead, and soft bead like turquoise bead, size from 3/4/6/8/10/12/14/16/18/20 mm, 15-50 kg bead one day

Step one:Use 24'' slab saw cut the big rock into small size rock(LS-001-24-A)
Step two:Use 16'' multi blade slab cutting machine, cut small size rock into slabs(LS-002-A)
Step three:Use automatic cut slab into strips machine(LS-006-A)
Steph four:Use automatic cut strips into stone cube(LS-006-B)
Step five:Use stone bead chamfer machine, remove the sharp corner of the bead

(LS-300-1-A)
Step six:Use coarse stone bead milling machine, rough milling, after this step, the bead almost round(LS-300-2-A)
Step seven:Use high precision stone bead milling machine, make bead perfect round

(LS-300-3-A)
Step eight:Use multi needle/tip ultrasonic drilling machine, can drill many beads at one time automatically(LS-100-1800W)
Step nine:Use vibration tumbler polishing machine, polish the drilled beads, make it shiny enough.

The photo below shows how to make stone bead with small batch, 2-5 kg one day.

Step one:Use 12'' manual stone cutting machine, cut stone into slab, strips, cube(LS-007-B)
Step two:Use stone bead chamfer machine, remove the sharp corner of the bead

(LS-300-1-A)
Step three:Use coarse stone bead milling machine, rough milling, after this step, the bead almost round(LS-300-2-A)
Step four:Use high precision stone bead milling machine, make bead perfect round

(LS-300-3-A)
Step five:Use manual bead drilling machine, drill bead one by one(LS-306-B)
Step six:Use vibration tumbler polishing machine, polish the drilled beads, make it shiny enough.